LIGHTS TO GO!
  G5 Sequence Animation

Model T5 - 4/5 Light Signal Sequencer

For Traffic Signals with one or two turn arrows

If you have a traffic signal with either one or two turn arrows and would like to put it on display we have what it takes to make it operate.  Until now one would have to buy a cabinet full of expensive electronics just to make one of these signals operate.  Now we have a very nice, compact control that will make these lights cycle just like they should.  This control is only 3 x 3 inches and fits neatly inside the case of your light and operates directly from the 120VAC line.  An easy to follow wiring diagram and hookup instructions are included with each unit.  All you have to do is mount the control board, wire the lights to it and connect your power cord. 
 
 
 
 
 
 
Model T5 Signal Sequencer

Model T5 - 5 Light Signal Sequencer Specifications:

  • Total Cycle time adjustable from < 6 Sec to > 60 Seconds
  • 5 Lamp output channels
  • 120VAC TRIAC output for 100% LED compatibility  
  • 150W max. Lamp / channel, 
  • 8 position screw terminal strip hookup
  • Wiring Diagram and Installation Instructions included
    		•

     

    The new Model T5 replaces our retrired G4 and G5 Models of fixed sequence controls. This control replaces all of their functions with its adjustable speed cycle and 4 selectable operation sequences. 


    TECHNICAL SPECIFICATIONS:

    T5 Sequence

    (Replaces G4& G5)

    4 Light
    Straight Seq

    Yel

    Red

    Red

    Grn Arrow

    Green

    Green

    (Return to Yel)

    5 Light
    Straight Seq

    Yel

    Red

    Red

    Grn Arrow

    Yel Arrow

    Green

    Green

    5 Light
    Overlap Seq

    Yel

    Red

    Green

    Grn Arrow

    Yel Arrow

    4 Light
    Overlap Seq

    Yel

    Red

    Green

    Grn Arrow

    Yel Arrow



  • Straight Sequence mode (inline)- only one light is on at a time, 4 light or 5 light mode, Turn arrows follow the normal Grn, Yellow, Red phases. Cycle includes only one turn arrow (4 light mode) or 2 turn arrows (5 light mode.)  


  • Overlap Mode turn arrow outputs overlap the Red and Green portion of the main signal ie. are on during the last part of Red light phase plus first part of Green light phase. Yellow arrow is on during part of the Green light phase only.  

      •  

      The speed of the sequence is adjustable from 6 sec to more than 1 min !



     
     



    Lights to Go! - Price List
    & Online Order Form



     
     
     

    (C) 2002 - 2005 Lights To Go! all rights reserved